This Aluminum 6061 stock sheet, in a 0.763-inch thickness, is specifically curated for lubricating applications. Its robust composition ensures superior performance and longevity in demanding environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.763" |
| Length | 47" |
| Width | 30" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet boasts a precise thickness of 0.763 inches, a length of 47 inches, and a width of 30 inches. Aluminum 6061 is a precipitation-hardened aluminum alloy known for its excellent corrosion resistance, good strength, weldability, and machinability. This makes it an ideal substrate for components within lubricating systems, offering consistent performance and durability. Its dimensional stability ensures tight tolerances critical for efficient operation of gears, bearings, and other moving parts within fluid-handling mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface of the Aluminum 6061 sheet thoroughly to remove any debris or contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate tooling for Aluminum 6061. 3. Deburr all edges to prevent potential material fatigue or premature wear in the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for aluminum alloys. | Employ specialized tooling with appropriate rake angles and cooling lubricants to ensure clean cuts and prevent material adhesion. |
| Failing to properly deburr edges after cutting. | Thoroughly deburr all cut edges using a deburring tool to remove sharp edges and potential stress risers. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Components for oil and grease distribution systems, Bearings and bushings in low-friction environments, Guides and slides in automated lubrication machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||