This Aluminum 6061 stock sheet, specifically engineered for lubricating applications, offers superior strength and corrosion resistance. Its precise dimensions ensure seamless integration into complex industrial machinery.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.284" |
| Length | 14" |
| Width | 38" |
Designed for demanding industrial environments, this Aluminum 6061 stock sheet features a thickness of 0.284 inches, a width of 38 inches, and a length of 14 inches. Aluminum 6061 is a precipitation-hardened alloy known for its excellent corrosion resistance, good strength, weldability, and machinability, making it ideal for components requiring low friction and wear resistance in lubricating systems. Its dimensional stability and resistance to environmental degradation ensure reliable performance under continuous operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Accurately position the Aluminum 6061 stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners, ensuring uniform pressure distribution to prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or uneven wear. | Thoroughly clean and degrease the mounting surface before installation. |
| Over-tightening fasteners, causing stress concentrations and potential sheet deformation. | Tighten fasteners incrementally and evenly, following torque specifications if provided. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Wear strips for conveyor systems, Guide rails in automated machinery, Low-friction mounting plates for rotating components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||