This premium Aluminum 6061 stock sheet provides exceptional strength-to-weight ratio. Precisely manufactured to 0.831" thickness, 23" width, and 31" length, it's engineered for critical pneumatic components and demanding industrial uses.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.831" |
| Length | 23" |
| Width | 31" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet exhibits superior corrosion resistance and excellent weldability, crucial for pneumatic system integrity. Its T6 temper ensures optimal mechanical properties, including a yield strength of 35,000 psi and tensile strength of 38,000 psi. The 0.831" thickness, combined with precise 23" width and 31" length, facilitates complex machining and reliable structural support in high-pressure pneumatic environments. This material is widely adopted for its balance of performance and cost-effectiveness in specialized applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface integrity prior to cutting or machining. 2. Utilize appropriate cutting tools designed for aluminum alloys to achieve precise tolerances. 3. Deburr all cut edges to prevent stress risers and ensure smooth component integration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without appropriate adjustments. | Employ carbide-tipped or specialized aluminum cutting tools to prevent excessive heat buildup and ensure clean cuts. |
| Ignoring deburring procedures on machined edges. | Thoroughly deburr all edges after cutting or machining to eliminate sharp points that could lead to material fatigue or safety hazards. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom pneumatic manifold fabrication, Structural components for control systems, Pressure vessel housings and end caps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||