This 0.504" thick Aluminum 6061 stock sheet, measuring 17" x 31", is engineered for high-performance lubrication systems and demanding fabrication projects requiring superior strength and corrosion resistance.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.504" |
| Length | 17" |
| Width | 31" |
Precision-manufactured to tight tolerances, this Aluminum 6061 stock sheet offers a thickness of 0.504 inches, a length of 17 inches, and a width of 31 inches. Aluminum 6061 is a heat-treatable alloy renowned for its good strength-to-weight ratio, excellent corrosion resistance, and superior weldability. Its balanced properties make it an ideal substrate for components within lubricating systems, enabling smooth operation and durability. This sheet is also well-suited for general fabrication, structural applications, and prototype development where dimensional accuracy and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface integrity prior to cutting or machining. 2. Employ appropriate cutting tools and speeds for Aluminum 6061 to minimize heat buildup and ensure clean edges. 3. Integrate into lubrication system manifold or structural component per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools or speeds, leading to material deformation or poor edge quality. | Consult material datasheets and use carbide or high-speed steel cutting tools with appropriate lubrication and recommended speeds for Aluminum 6061. |
| Ignoring surface finish requirements for lubrication applications, potentially causing friction or wear. | Ensure the surface finish meets the specified Ra value through post-machining or polishing operations, if required by the lubrication system design. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Lubrication system manifolds and components, Structural supports and frames, General machining and fabrication projects.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||