This Aluminum 6061 stock sheet is engineered for demanding lubricating applications. Its precise dimensions and superior material properties ensure reliable performance in environments requiring low friction and wear resistance.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.460" |
| Length | 44" |
| Width | 23" |
Specified by design engineers worldwide, this 0.460" thick Aluminum 6061 stock sheet, measuring 44" in length and 23" in width, offers exceptional machinability and a good strength-to-weight ratio. Commonly used in applications where lubrication is critical, its inherent corrosion resistance is further enhanced by the alloy's composition. This material is well-suited for components in machinery, bearings, and slide mechanisms that benefit from its smooth surface finish and low coefficient of friction when properly treated or utilized.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut to required dimensions using appropriate tooling. 3. Apply designated lubricant as per application requirements before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong cutting tool, leading to burrs or poor edge quality. | Utilize carbide-tipped blades or high-speed steel cutters designed for aluminum, with adequate coolant. |
| Inadequate surface preparation for lubrication. | Thoroughly degrease and clean the surface before applying any lubricating agents to ensure proper adhesion. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Bearing surfaces, Sliding mechanisms, Low-friction components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||