This 0.441" thick Aluminum 6061 stock sheet, measuring 32" x 35", is engineered for optimal performance in lubricated environments. Its superior strength-to-weight ratio and excellent corrosion resistance make it a prime choice for demanding applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.441" |
| Length | 32" |
| Width | 35" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.441 inches, a length of 32 inches, and a width of 35 inches. The 6061 alloy is a precipitation-hardened aluminum alloy, offering excellent mechanical properties including moderate to high strength, good toughness, and superior corrosion resistance, especially in marine environments. Its machinability is also noteworthy, allowing for precise fabrication. This material is specifically chosen for applications where inherent lubricity and resistance to wear under frictional forces are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from debris or contaminants. 2. Apply a suitable lubricant or coating as specified by the application requirements. 3. Carefully position and secure the Aluminum 6061 stock sheet into its designated location, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of lubricant for the specific operating conditions. | Consult lubrication charts and material compatibility guides to select a lubricant that is effective with Aluminum 6061 and suitable for the expected temperatures, pressures, and environmental factors. |
| Inadequate surface preparation leading to poor lubricant adhesion or premature wear. | Thoroughly degrease and clean the Aluminum 6061 surface before lubricant application. Mechanical abrasion may be required in some cases to create a profile for optimal adhesion. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Bearing surfaces in low-friction machinery, Guide rails and sliding components, Components in pump and valve assemblies requiring self-lubricating properties.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||