High-strength Aluminum 6061 stock sheet, precisely cut to 0.405" thickness, 35" length, and 33" width. Engineered for superior performance in demanding suspending and bracing applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.405" |
| Length | 35" |
| Width | 33" |
Precision-manufactured to tight tolerances, this Aluminum 6061 stock sheet offers exceptional structural integrity. With a nominal thickness of 0.405 inches, a length of 35 inches, and a width of 33 inches, it provides substantial material for fabrication. Aluminum 6061 is a precipitation-hardenable alloy renowned for its excellent corrosion resistance, good weldability, and high strength-to-weight ratio, making it a premier choice for aerospace, automotive, and general structural components where load-bearing capacity and environmental durability are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the 6061 aluminum sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw, waterjet cutter) to achieve desired dimensions. 3. Fabricate and fasten the cut sheet to the structural framework using approved methods (e.g., welding, riveting, bolting).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to material deformation or inaccurate sizing. | Employ high-quality, sharp cutting tools specifically designed for aluminum to ensure clean cuts and dimensional accuracy. |
| Inadequate load calculations for suspending and bracing applications. | Consult engineering specifications and perform thorough load analysis to ensure the fabricated components can safely support the intended weight and stresses. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural bracing in machinery and equipment, Custom suspension systems for industrial components, Support frames and mounting platforms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||