This robust Industrial O-Ring, crafted from high-grade Aluminum 6061 silicone, provides exceptional sealing performance in challenging industrial applications. Its precise dimensions ensure a reliable, long-lasting seal against leaks.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 4.526" |
| Outside Diameter | 7.837" |
| Cross Section | 0.182" |
Designed for demanding industrial environments, this silicone O-ring features an Inside Diameter (ID) of 4.526 inches, an Outside Diameter (OD) of 7.837 inches, and a Cross Section (CS) of 0.182 inches. The Aluminum 6061 material offers excellent resistance to a broad spectrum of chemicals, ozone, and UV radiation, while maintaining its flexibility and sealing integrity across a wide temperature range (-60°C to +230°C). This makes it ideal for static and dynamic sealing in pumps, valves, automotive systems, and food processing equipment where hygiene and chemical inertness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from any debris or sharp edges. 2. Carefully place the O-ring into the groove, avoiding stretching or twisting. 3. Verify proper seating and compression of the O-ring before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently position the O-ring without excessive tension to prevent premature failure and loss of sealing force. |
| Installing into a dirty or damaged groove. | Thoroughly clean the groove and inspect for any imperfections that could compromise the seal. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Chemical processing equipment, Automotive fluid systems, High-temperature industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||