This industrial O-ring, crafted from high-grade Aluminum 6061, offers superior sealing performance. Its precise dimensions ensure a tight, leak-proof fit in critical applications requiring resilience and durability.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.580" |
| Outside Diameter | 5.924" |
| Cross Section | 0.226" |
Specified by design engineers worldwide, this Silicone O-ring is engineered for optimal sealing in challenging industrial environments. Constructed from robust Aluminum 6061, it boasts an inside diameter of 1.580 inches, an outside diameter of 5.924 inches, and a cross-section of 0.226 inches. This material combination provides excellent resistance to a wide range of chemicals, extreme temperatures, and mechanical stress, making it ideal for static and dynamic sealing applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free from debris. 2. Carefully place the O-ring into the designated groove, avoiding any stretching or twisting. 3. Apply light lubrication compatible with the O-ring material if necessary for assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive tension to prevent premature failure and loss of sealing capability. |
| Using incompatible lubricants. | Always verify lubricant compatibility with Silicone and Aluminum 6061 to avoid material degradation. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Automotive sealing components, Aerospace fluid systems, Industrial pump and valve seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||