This industrial-grade Silicone O-ring, constructed from robust Aluminum 6061, is engineered for superior sealing in critical applications. Its precise dimensions ensure a secure fit and long-lasting performance.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.532" |
| Outside Diameter | 4.308" |
| Cross Section | 0.236" |
Engineered for reliability and performance, this Industrial O-Ring boasts a precise Inside Diameter of 9.532 inches, an Outside Diameter of 4.308 inches, and a Cross Section of 0.236 inches. The material composition of Aluminum 6061 provides excellent corrosion resistance and structural integrity, making it ideal for high-pressure and high-temperature environments. Silicone offers exceptional flexibility and a wide operating temperature range, ensuring a tight seal against leaks in challenging industrial settings such as fluid power systems, chemical processing, and HVAC applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the groove and mating surfaces thoroughly to remove any debris or contaminants. 2. Lightly lubricate the O-ring with a compatible lubricant to ease installation and prevent damage. 3. Carefully install the O-ring into the designated groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, which can cause nicks or cuts on the O-ring surface. | Apply a suitable lubricant and gentle pressure to seat the O-ring correctly. |
| Installing a twisted O-ring, leading to leakage and premature failure. | Ensure the O-ring is laid flat in the groove and does not twist during installation. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Fluid Power Systems (Hydraulics & Pneumatics), Chemical Processing Equipment, Automotive and Aerospace Seals, HVAC Systems, Food and Beverage Processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||