This premium Aluminum 6061 stock sheet offers exceptional strength, corrosion resistance, and weldability. Precisely manufactured to exacting standards for superior performance in diverse engineering projects.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.626" |
| Length | 24" |
| Width | 17" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.626 inches, a length of 24 inches, and a width of 17 inches. It conforms to ASTM B209 specifications, exhibiting a typical tensile strength of 45-50 ksi and yield strength of 40-45 ksi. The alloy's inherent attributes, including good formability and machinability, make it ideal for structural components, aerospace parts, marine applications, and custom fabrication where high strength-to-weight ratio is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications and dimensions against project requirements. 2. Prepare mating surfaces for welding or fastening, ensuring cleanliness and proper alignment. 3. Execute fabrication processes (cutting, bending, welding, machining) according to design specifications and industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized material for load-bearing applications. | Always confirm the material's mechanical properties and calculate required dimensions based on stress analysis and safety factors. |
| Inadequate surface preparation prior to welding. | Thoroughly clean the welding area of oxides, grease, and contaminants using appropriate solvents and mechanical methods to ensure sound weld integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine fittings and structures, Automotive parts and frames, Custom fabrication and prototyping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||