This premium Aluminum 6061 stock sheet offers superior strength-to-weight ratio and exceptional corrosion resistance. Engineered for demanding industrial applications, it provides a reliable foundation for critical components.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.491" |
| Length | 13" |
| Width | 36" |
A high-performance industrial component, this Aluminum 6061 stock sheet measures 0.491 inches in thickness, 13 inches in width, and 36 inches in length. Composed of Aluminum 6061 alloy, it delivers excellent mechanical properties, including high tensile strength and yield strength, coupled with good formability and machinability. Its inherent resistance to corrosion makes it suitable for a wide array of environmental conditions. This material is widely specified for structural applications, marine hardware, automotive parts, and aerospace components where reliability and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and level. 2. Precisely mark the desired cut lines according to the project blueprint. 3. Employ appropriate cutting tools for aluminum, such as a band saw or abrasive chop saw, with proper coolant if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper lubrication. | Utilize high-speed steel (HSS) or carbide-tipped blades specifically designed for aluminum cutting, along with a cutting fluid to prevent excessive heat buildup and galling. |
| Ignoring surface preparation before welding or bonding. | Thoroughly clean the aluminum surface with a degreaser and a stainless steel wire brush to remove any oxides or contaminants that could compromise the integrity of the joint. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural Framing, Marine Components, Aerospace Sub-assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||