Precision-engineered Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Ready for machining and fabrication in critical industrial applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.377" |
| Length | 13" |
| Width | 35" |
Trusted by engineers across multiple sectors, this Aluminum 6061 stock sheet is manufactured to exacting standards, boasting a thickness of 0.377 inches, a length of 13 inches, and a width of 35 inches. The 6061 alloy is renowned for its excellent weldability, machinability, and resistance to stress corrosion cracking, making it a prime choice for demanding structural components. Its heat-treatable nature allows for a wide range of mechanical properties suitable for aerospace frames, marine structures, automotive parts, and general fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and well-lit. 2. Secure the aluminum sheet firmly to the cutting surface using appropriate clamps. 3. Utilize a saw blade specifically designed for cutting aluminum, with appropriate feed rates and coolant if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a blade not suited for aluminum, leading to poor cuts and potential blade damage. | Always use a carbide-tipped blade with a high tooth count, designed for non-ferrous metals. |
| Improper clamping, resulting in vibration and inaccurate cuts. | Employ sturdy clamps at close intervals to maintain sheet stability during sawing. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine hardware and fittings, Automotive chassis and body parts, High-performance bicycle frames, General structural fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||