This Aluminum 6061 stock sheet, precisely cut to 0.158" x 26" x 26", is engineered for superior performance in suspending and bracing applications. Its robust construction ensures reliability and longevity in demanding environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.158" |
| Length | 26" |
| Width | 26" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.158 inches, with exact dimensions of 26 inches in length and 26 inches in width. Composed of Aluminum Alloy 6061, known for its excellent strength-to-weight ratio, good corrosion resistance, and high weldability, this sheet is ideal for structural components in suspending and bracing systems. Its T6 temper provides enhanced mechanical properties suitable for a wide range of industrial and commercial applications requiring dependable support and stability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended mounting surface is clean, dry, and structurally sound. 2. Precisely mark and drill mounting holes according to the design specifications, considering load distribution. 3. Securely fasten the Aluminum 6061 sheet using appropriate hardware (e.g., bolts, rivets) rated for the anticipated load and compatible with aluminum.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incompatible fasteners. | Always use fasteners with adequate shear and tensile strength, and ensure they are compatible with aluminum to prevent galvanic corrosion. |
| Over-tightening fasteners, causing deformation. | Tighten fasteners to the manufacturer's recommended torque specifications to avoid stressing the aluminum sheet and compromising its structural integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural bracing in construction projects, Mounting plates for industrial equipment, Custom support frames for aerospace components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||