This 0.254" thick Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely cut to 47" x 43", it's ideal for fabrication, welding, and machining applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.254" |
| Length | 47" |
| Width | 43" |
Precision-manufactured to tight tolerances, this 6061 aluminum alloy sheet exhibits excellent mechanical properties, including good formability, weldability, and machinability. Its composition of aluminum, magnesium, and silicon provides a balanced profile for structural integrity and resistance to environmental degradation. With a thickness of 0.254 inches, a length of 47 inches, and a width of 43 inches, this sheet is engineered for demanding applications requiring reliable performance in aerospace, automotive, marine, and general industrial sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure a clean and stable work surface for cutting. 2. Utilize appropriate sawing or cutting equipment calibrated for aluminum. 3. Measure and mark cut lines accurately before proceeding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting tools, leading to poor edge quality and increased material waste. | Employ sharp, specialized aluminum cutting blades and ensure proper tool speed and feed rates. |
| Inaccurate measurement and marking, resulting in off-spec dimensions for fabricated parts. | Double-check all measurements with a reliable measuring tool and use a fine-tip marker or scribe for precise marking. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace components, Automotive structural parts, Marine fabrication, General industrial machinery, Custom jigs and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||