This 0.429" thick Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and excellent corrosion resistance, making it a premier choice for demanding fabrication projects.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.429" |
| Length | 15" |
| Width | 22" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet measures 0.429 inches in thickness, 15 inches in width, and 22 inches in length. Composed of alloy 6061, it boasts a T6 temper, signifying a heat-treated condition that optimizes its mechanical properties, including a tensile strength typically around 45 ksi and yield strength of approximately 40 ksi. Its composition of magnesium and silicon provides a balanced blend of strength, weldability, and machinability, making it suitable for a wide array of structural and general-purpose applications where durability and performance are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Measure and mark cut lines precisely on the aluminum sheet. 3. Utilize appropriate cutting tools (e.g., band saw, CNC plasma cutter) with proper safety precautions to achieve desired dimensions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting speed or feed rate, leading to tool wear or material deformation. | Consult material cutting charts for Aluminum 6061 T6 and adjust cutting parameters accordingly. |
| Insufficient support during cutting, causing vibration and inaccurate cuts. | Secure the aluminum sheet firmly with clamps or a support table to minimize movement. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural components for aerospace and automotive, Marine hardware and boat building, Heat sinks and electronic enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||