This robust Aluminum 6061 stock sheet, precision-cut to 0.709" thickness, 15" length, and 14" width, is engineered for critical safety applications requiring exceptional durability and structural integrity.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.709" |
| Length | 15" |
| Width | 14" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet provides a superior combination of strength, weldability, and corrosion resistance. Its alloy composition (typically 0.8-1.2% Mg, 0.4-0.8% Si, 0.15-0.40% Cu, 0.04-0.35% Cr) offers excellent mechanical properties for demanding industrial environments. The 0.709-inch thickness ensures significant structural load-bearing capacity, making it suitable for fabricating safety barriers, machine guards, and structural components where impact resistance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, dry, and free of contaminants. 2. Accurately mark and pre-drill mounting holes according to design specifications. 3. Securely fasten the Aluminum 6061 sheet using appropriate hardware, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for structural integrity. | Select fasteners with adequate shear strength and tensile strength to support the intended load. |
| Improper surface preparation leading to poor adhesion or corrosion. | Thoroughly degrease and, if necessary, abrade the mounting surfaces to ensure optimal contact and prevent galvanic corrosion. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Machine guards and safety enclosures, Structural components in safety-critical equipment, Protective barriers and partitions.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||