This 0.899-inch thick Aluminum 6061 sheet offers superior strength and corrosion resistance. Precisely cut to 21" x 26", it's engineered for demanding fabrication and structural applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.899" |
| Length | 21" |
| Width | 26" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet measures 0.899 inches in thickness, 21 inches in length, and 26 inches in width. 6061 is a precipitation-hardened aluminum alloy containing magnesium and silicon as its main alloying elements. It is known for its good strength, excellent corrosion resistance, weldability, and formability. This specific gauge and dimensional configuration makes it suitable for a wide range of applications including structural components, marine hardware, automotive parts, and general fabrication where a robust yet lightweight material is required.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper safety equipment is worn, including eye protection and gloves. 2. Verify the cutting tool is appropriate for aluminum and its sharpness. 3. Accurately measure and mark the desired cut lines on the sheet. 4. Proceed with a steady and controlled sawing or cutting operation, minimizing vibration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull blade, leading to poor cuts and excessive heat. | Utilize a sharp, specifically designed blade for cutting aluminum to ensure clean cuts and prevent overheating. |
| Not properly supporting the sheet during cutting, causing vibration and potential inaccuracies. | Ensure the aluminum sheet is securely supported and clamped to minimize vibration and maintain cutting precision. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace components, Marine hardware, Automotive fabrication, Structural frames, General industrial parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||