This 0.874-inch thick Aluminum 6061 stock sheet, measuring 44" x 19", is a premium material choice for demanding pneumatic applications requiring superior strength and durability.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.874" |
| Length | 44" |
| Width | 19" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet boasts exceptional strength-to-weight ratio and excellent corrosion resistance, crucial for the integrity of pneumatic components. The 0.874" thickness provides significant structural rigidity, suitable for high-pressure environments and manifold blocks. Its machinability allows for precise customization and complex geometric features essential for efficient air distribution and control within pneumatic circuits. Material composition adheres to industry standards for aerospace and industrial applications, ensuring consistent material properties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and flatness against project requirements. 2. Machine to final part specifications using appropriate cutting tools and speeds for Aluminum 6061. 3. Deburr all machined edges to prevent particulate contamination within pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-pressure pneumatic manifolds. | Always select material thickness sufficient to withstand the maximum operating pressure of the pneumatic system with an adequate safety factor. |
| Inadequate deburring leading to system contamination. | Thoroughly deburr all cut and machined edges to remove sharp fragments that could compromise pneumatic valve operation or seal integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic Manifold Blocks, Pneumatic Cylinder Components, Custom Pneumatic Fixturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||