This 0.861" thick Aluminum 6061 sheet offers excellent strength-to-weight ratio and superior corrosion resistance. Precisely cut to 33" x 18", it's engineered for demanding fabrication and structural applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.861" |
| Length | 33" |
| Width | 18" |
A high-performance industrial component, this Aluminum 6061 alloy stock sheet boasts a nominal thickness of 0.861 inches, a length of 33 inches, and a width of 18 inches. 6061 aluminum is a precipitation-hardened aluminum alloy, offering a good combination of strength, weldability, and corrosion resistance. Its mechanical properties make it suitable for a wide range of structural applications, including aerospace components, automotive parts, and marine construction, where reliable performance under stress is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper safety equipment is worn, including eye protection and gloves. 2. Verify the material dimensions and specifications against project requirements. 3. Proceed with fabrication or integration into the intended assembly following standard machining and joining practices for 6061 aluminum.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for aluminum alloys. | Employ high-speed steel or carbide-tipped cutting tools specifically designed for aluminum to prevent galling and ensure clean cuts. |
| Inadequate support during cutting, leading to vibration and imprecise edges. | Utilize appropriate clamping and support mechanisms to minimize vibration and maintain dimensional accuracy throughout the cutting process. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural Frameworks, Machined Components, Welded Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||