This Aluminum 6061 stock sheet, sized at 0.822" x 43" x 42", is engineered for superior performance in pneumatic systems. Its robust alloy composition ensures longevity and reliability under pressure.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.822" |
| Length | 43" |
| Width | 42" |
Built to exacting engineering tolerances, this 0.822-inch thick Aluminum 6061 stock sheet offers exceptional dimensional stability and flatness, critical for precision pneumatic component fabrication. Aluminum 6061 is a precipitation-hardened aluminum alloy known for its excellent corrosion resistance, moderate to high strength, and good weldability, making it ideal for air cylinders, valve bodies, manifold blocks, and structural supports within pneumatic assemblies where weight and performance are paramount. Its consistent material properties ensure predictable machining and reliable sealing surfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against design specifications. 2. Machine to precise component geometry using appropriate cutting tools and speeds for Aluminum 6061. 3. Deburr all edges thoroughly to prevent stress risers and ensure proper assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper clamping during machining, leading to sheet warpage. | Utilize a vacuum chuck or strategically placed clamps that distribute pressure evenly to maintain flatness. |
| Using incorrect cutting fluids, causing tool wear or surface contamination. | Employ a coolant formulated for aluminum machining to optimize chip evacuation and prevent galling. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic cylinder construction, Manifold block fabrication, Valve body machining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||