This robust Aluminum 6061 stock sheet offers superior strength and corrosion resistance. Precisely manufactured to 0.795" thickness, 22" width, and 48" length, it's engineered for demanding electrical and lighting applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.795" |
| Length | 22" |
| Width | 48" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet (0.795" thickness x 22" width x 48" length) provides exceptional mechanical properties. Exhibiting a tensile strength of approximately 310 MPa and yield strength of 275 MPa, its excellent corrosion resistance, weldability, and formability make it a prime choice for structural components in electrical enclosures, heat sinks for lighting fixtures, and conductive busbars where performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free of contaminants. 2. Precisely cut the Aluminum 6061 sheet to required dimensions using appropriate cutting tools. 3. Fabricate and assemble components using recommended welding or joining techniques for Aluminum 6061.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or material deformation. | Utilize carbide-tipped blades or waterjet cutting for clean, precise cuts on Aluminum 6061. |
| Inadequate surface preparation before welding, resulting in poor weld quality. | Thoroughly clean the surface with a stainless steel brush and solvent to remove oxides and contaminants prior to welding. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Electrical Enclosure Fabrication, Heat Sinks for LED Lighting, Conductive Busbars and Connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||