This 0.787-inch thick Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely cut to 44" x 43", it's a versatile raw material for demanding fabrication.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.787" |
| Length | 44" |
| Width | 43" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.787 inches (20mm), a length of 44 inches (1118mm), and a width of 43 inches (1092mm). Alloy 6061 is a precipitation-hardened aluminum alloy containing magnesium and silicon as its main alloying elements. It is known for its good formability, weldability, machinability, and excellent corrosion resistance, especially in marine environments. This sheet is suitable for a wide range of structural applications requiring moderate to high strength.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and surface finish against project requirements. 2. Prepare edges for joining or machining according to design specifications. 3. Integrate into the final assembly using appropriate fastening or welding techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools on thick aluminum without proper lubrication and cooling. | Employ high-speed steel or carbide tooling specifically designed for aluminum, utilizing copious amounts of coolant and appropriate feed rates to prevent excessive heat buildup and tool wear. |
| Overlooking the slight dimensional variations inherent in raw material stock. | Always perform precise in-house measurements and consider any necessary allowances for machining or finishing before committing to a final design or cutting process. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural components in aerospace and automotive industries, Marine hardware and structural elements, General fabrication and custom machine parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||