This robust Aluminum 6061 stock sheet provides exceptional strength-to-weight ratio. Precisely manufactured to 0.746" thickness, 16" width, and 43" length, it's engineered for reliable suspending and bracing solutions in industrial environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.746" |
| Length | 16" |
| Width | 43" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.746 inches, a width of 43 inches, and a length of 16 inches. Composed of a precipitation-hardenable aluminum alloy, 6061 exhibits excellent corrosion resistance, good weldability, and high mechanical strength, making it a preferred material for structural components requiring significant load-bearing capacity and durability. Its thermal conductivity also contributes to effective heat dissipation in demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the supporting structure is adequately rated for the intended load. 2. Accurately measure and cut the Aluminum 6061 sheet to the required dimensions for bracing or suspension. 3. Securely fasten the sheet using appropriate high-strength fasteners, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for the load requirements. | Always select fasteners with a tensile strength and shear strength that significantly exceed the calculated loads. |
| Inadequate surface preparation before fastening, leading to stress concentrations. | Ensure all contact surfaces are clean, smooth, and free from debris or imperfections to promote uniform stress distribution. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural bracing in heavy machinery, Suspension components for industrial gantries, Custom support frames in manufacturing facilities.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||