This Aluminum 6061 stock sheet provides a robust, corrosion-resistant substrate for demanding abrading and polishing operations. Its precise dimensions and superior alloy composition ensure consistent performance and exceptional finishing results.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.678" |
| Length | 21" |
| Width | 39" |
Precision-manufactured to tight tolerances, this Aluminum 6061 stock sheet measures 0.678 inches in thickness, 21 inches in length, and 39 inches in width. Composed of the versatile 6061 alloy, it offers a balanced combination of good strength, excellent corrosion resistance, weldability, and formability. This makes it an ideal material for a wide range of industrial finishing processes, including surface preparation for coatings, decorative polishing, and the creation of precision components where a smooth, defect-free surface is critical. The alloy's inherent properties contribute to predictable material removal and a superior final finish.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface to be abraded or polished is clean and free from contaminants. 2. Securely affix the Aluminum 6061 sheet to your polishing or abrading equipment, ensuring proper alignment and stability. 3. Apply appropriate abrasive media or polishing compounds as per the finishing process requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive pressure during initial stages of polishing. | Gradually increase pressure as the finish refines, starting with coarser abrasives if necessary and progressing to finer grits. |
| Inadequate cleaning between abrasive grits. | Thoroughly clean the Aluminum 6061 surface and the abrasive media between each grit change to prevent cross-contamination and surface scratching. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Surface preparation for anodizing, High-gloss decorative finishing, Precision component polishing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||