This robust Aluminum 6061 stock sheet offers exceptional strength and corrosion resistance, making it the superior choice for fabricating critical components in demanding pneumatic systems.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.670" |
| Length | 18" |
| Width | 25" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet is manufactured to exacting standards, featuring a precise thickness of 0.670 inches, a width of 25 inches, and a length of 18 inches. Aluminum 6061 is a precipitation-hardened alloy renowned for its excellent mechanical properties, including high tensile strength, good weldability, and superior corrosion resistance, making it exceptionally well-suited for the rigorous operational demands of pneumatic equipment and its associated structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity prior to fabrication. 2. Precisely cut and machine the sheet to design specifications. 3. Ensure all edges are deburred and surfaces are clean before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incorrectly specified material for pneumatic actuators. | Always confirm the exact material grade and dimensions meet or exceed the design requirements for pressure containment and structural integrity. |
| Improper edge finishing leading to stress concentrations. | Thoroughly deburr all cut edges to prevent premature failure under cyclic loading. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic cylinder bodies, Valve manifold substrates, Mounting brackets for pneumatic components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||