This Aluminum 6061 stock sheet is engineered for demanding pneumatic applications. Its robust 0.633-inch thickness, combined with excellent corrosion resistance and machinability, makes it a prime material for fabrication.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.633" |
| Length | 42" |
| Width | 23" |
A proven choice for industrial professionals, this Aluminum 6061 stock sheet offers exceptional performance in pneumatic systems. With precise dimensions of 0.633 inches thickness, 42 inches length, and 23 inches width, it meets stringent manufacturing requirements. Aluminum 6061 is a heat-treatable alloy renowned for its moderate to high strength, excellent corrosion resistance, and good weldability, making it ideal for fabricating durable pneumatic cylinders, manifolds, and structural components. Its lightweight nature also contributes to improved system efficiency and reduced operational load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions against design specifications. 2. Prepare surfaces for machining or joining as per fabrication drawings. 3. Fabricate components adhering to industry standards for pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect alloy for high-pressure pneumatic systems. | Always confirm the material's suitability for the specific pressure and environmental conditions of the pneumatic application. Aluminum 6061 is generally suitable for moderate to high pressure, but verification is crucial. |
| Improper machining leading to stress concentrations. | Employ appropriate machining parameters to avoid introducing stress risers that could compromise the integrity of pneumatic components. Maintain sharp tooling and controlled feed rates. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic Cylinder Bodies, Manifold Blocks, End Caps and Pistons, Mounting Brackets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||