This Aluminum 6061 stock sheet provides exceptional strength-to-weight ratio and corrosion resistance, ideal for demanding pneumatic system components. Precisely sized for accurate fabrication and long-term performance.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.612" |
| Length | 27" |
| Width | 31" |
Precision-manufactured to tight tolerances, this Aluminum 6061 stock sheet measures 0.612 inches thick, 27 inches in length, and 31 inches in width. 6061 aluminum alloy is renowned for its excellent corrosion resistance, good weldability, and moderate to high strength, making it a superior choice for pneumatic manifold blocks, actuator housings, and structural support elements within pneumatic systems. Its machinability allows for intricate designs and smooth surface finishes essential for efficient air flow and seal integrity. This material's mechanical properties ensure reliable operation under pressure and repeated stress cycles.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against project design specifications. 2. Machine to required component geometry using appropriate cutting tools and speeds. 3. Deburr all edges and surfaces to prevent material fatigue and ensure proper sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized material for structural components | Always confirm the required material thickness and dimensions based on load calculations and intended application. |
| Inadequate deburring after machining | Thoroughly remove all sharp edges and burrs to prevent stress concentration and potential leaks in pneumatic assemblies. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic Manifold Blocks, Actuator Housings, Pneumatic System Frame Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||