This 0.468" thick Aluminum 6061 stock sheet, measuring 32" x 33", is engineered for lubricating applications. Its superior machinability and corrosion resistance make it an ideal substrate for enhanced performance.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.468" |
| Length | 32" |
| Width | 33" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet boasts a precise thickness of 0.468 inches, a length of 32 inches, and a width of 33 inches. Material composition adhering to ASTM B209 standards ensures optimal performance in lubricating applications, leveraging the inherent strength, moderate to high tensile strength, excellent corrosion resistance, and superior machinability characteristic of the 6061 alloy. This makes it an ideal choice for components requiring smooth operation and extended service life under varied conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Position the Aluminum 6061 sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or bonding agents, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that may cause galvanic corrosion. | Utilize fasteners made of compatible materials, such as stainless steel or aluminum alloys, to prevent galvanic corrosion. |
| Improper surface preparation leading to poor adhesion or coating performance. | Thoroughly clean and degrease the aluminum surface before any subsequent processing or application of lubricants/coatings. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Bearing surfaces, Guide rails, Low-friction components, Wear pads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||