A premium grade Aluminum 6061 stock sheet, precision manufactured for demanding industrial applications. Offers superior strength, corrosion resistance, and weldability for critical components.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.446" |
| Length | 15" |
| Width | 22" |
A high-performance industrial component, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.446 inches, a length of 15 inches, and a width of 22 inches. Fabricated from alloy 6061, known for its excellent strength-to-weight ratio, good machinability, and superior corrosion resistance, particularly in marine environments. This material is widely utilized in aerospace, automotive, marine, and general structural fabrication due to its versatility and reliability under various service conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of contaminants. 2. Accurately measure and cut the sheet to the required dimensions using appropriate cutting tools. 3. Prepare edges for joining or further fabrication according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to edge deformation or burrs. | Employ shear blades, abrasive saws, or waterjet cutting for clean and precise cuts. |
| Inadequate surface preparation before welding or bonding. | Thoroughly degrease and mechanically clean the joint area to ensure optimal adhesion and weld integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural components, Marine hardware, Aerospace assemblies, Automotive chassis parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||