This robust Aluminum 6061 stock sheet is engineered for demanding pneumatic systems. Its precise dimensions and superior material properties ensure reliable performance and longevity in critical industrial environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.354" |
| Length | 31" |
| Width | 42" |
A high-performance industrial component, this Aluminum 6061 stock sheet offers a nominal thickness of 0.354 inches, a length of 31 inches, and a width of 42 inches. Fabricated from Aluminum Alloy 6061, a precipitation-hardened magnesium-silicon alloy, it provides an exceptional balance of strength, formability, and corrosion resistance, crucial for pneumatic enclosures and structural elements. Its moderate tensile strength and yield strength make it suitable for applications subjected to moderate pressures and stresses within pneumatic circuits. The material's excellent weldability and machinability further enhance its utility in custom fabrication and modification.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly cleaned and free of any contaminants. 2. Precisely cut or machine the sheet to the required dimensions for your pneumatic assembly. 3. Securely fasten the sheet using appropriate fasteners and techniques for structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade aluminum alloy for critical structural components. | Always specify Aluminum 6061 for its proven strength and reliability in industrial pneumatic applications. |
| Inadequate surface preparation before machining or welding. | Thoroughly clean the Aluminum 6061 surface to prevent contamination and ensure optimal fabrication results. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic Manifold Blocks, Enclosures for Pneumatic Controls, Structural Components in Automated Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||