This 0.313" thick Aluminum 6061 stock sheet, measuring 25" x 28", offers exceptional strength-to-weight ratio and corrosion resistance, making it a superior choice for demanding suspending and bracing applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.313" |
| Length | 25" |
| Width | 28" |
Specified by design engineers worldwide, this Aluminum 6061 alloy stock sheet, with nominal dimensions of 0.313 inches (7.95 mm) in thickness, 25 inches (635 mm) in length, and 28 inches (711.2 mm) in width, is engineered for superior performance. Possessing excellent weldability, machinability, and a high tensile strength of approximately 45,000 psi, it is ideal for structural components requiring significant load-bearing capacity while minimizing weight. Its inherent resistance to corrosion ensures longevity in diverse environmental conditions, critical for critical structural supports and framing in various industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all surfaces thoroughly to remove any contaminants. 2. Position the sheet precisely according to design specifications. 3. Secure using appropriate fastening methods such as welding, bolting, or riveting, ensuring structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for the sheet thickness and load requirements. | Select fasteners that are appropriately sized and rated for the anticipated loads and the 0.313" thickness of the 6061 aluminum. |
| Improper joint preparation leading to weak welds or connections. | Ensure all edges are beveled and free from oxidation or debris prior to welding or joining to achieve maximum bond strength. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural bracing for overhead fixtures, Support frames for industrial equipment, Aerospace component fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||