This 0.264" thick Aluminum 6061 stock sheet, measuring 43" x 34", is a premier material for electrical and lighting enclosures, heat sinks, and structural components.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.264" |
| Length | 43" |
| Width | 34" |
Specified by design engineers worldwide, this Aluminum 6061 alloy stock sheet exhibits a nominal thickness of 0.264 inches, a length of 43 inches, and a width of 34 inches. Its excellent corrosion resistance, good weldability, and high strength-to-weight ratio make it ideal for demanding electrical and lighting applications. The alloy's inherent conductivity ensures efficient heat dissipation and signal integrity, crucial for sensitive electronic components and lighting fixtures. This sheet is manufactured to precise tolerances, ensuring consistent performance and reliable integration into complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project specifications. 2. Cut to required dimensions using appropriate metalworking tools. 3. Prepare edges for joining or mounting as per design requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and dimensional inaccuracies. | Employ sharp, suitable cutting tools such as abrasive saws or waterjet cutters designed for aluminum, and deburr edges thoroughly. |
| Inadequate consideration of thermal expansion in enclosed electrical systems. | Factor in the coefficient of thermal expansion of Aluminum 6061 during the design phase for enclosures and mounting hardware to prevent stress and component damage. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Electrical Enclosures, Heat Sinks for LED Lighting, Control Panel Fabrication, Electrical Busbars.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||