This Aluminum 6061 stock sheet is precisely manufactured for applications within the lubricating sector. Its superior strength-to-weight ratio and excellent corrosion resistance make it a critical component for various industrial lubrication systems.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.234" |
| Length | 36" |
| Width | 25" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet offers a nominal thickness of 0.234 inches, a length of 36 inches, and a width of 25 inches. As a T6 temper alloy, it exhibits exceptional tensile and yield strength, making it suitable for components subjected to moderate stress and wear within lubricating systems. Its inherent machinability allows for intricate designs and precise fitting, while its excellent weldability ensures robust assembly. This material's resistance to corrosion is paramount for environments where lubricants may be present.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from contaminants. 2. Fabricate components according to design specifications, paying close attention to tolerances. 3. Integrate fabricated parts into the lubricating system, ensuring proper alignment and support.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a thinner gauge for high-stress lubrication components. | Select a thicker gauge of Aluminum 6061 or an alternative alloy with higher strength properties for critical load-bearing parts. |
| Inadequate surface preparation before machining or welding. | Thoroughly clean the Aluminum 6061 surface with appropriate degreasers and solvents to remove oils, dirt, and oxidation prior to any fabrication steps. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Lubrication system manifold fabrication, Bearing housing components, Grease fitting adaptors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||