This Aluminum 6061 stock sheet is engineered for the rigorous demands of pneumatic systems. Offering exceptional strength-to-weight ratio and excellent corrosion resistance, it ensures reliable performance in critical components.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.220" |
| Length | 23" |
| Width | 34" |
Precision-manufactured to tight tolerances, this 0.220-inch thick Aluminum 6061 sheet measures 23 inches in length and 34 inches in width. Aluminum 6061 is a heat-treatable alloy renowned for its moderate to high strength, excellent corrosion resistance, and good weldability, making it a superior choice for pneumatic manifold blocks, valve bodies, and structural components. Its machinability allows for intricate designs and precise fitting, crucial for maintaining system integrity and efficiency in high-pressure pneumatic environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly cleaned and free of contaminants. 2. Accurately mark and cut the sheet to the required dimensions using appropriate tooling. 3. Smooth all edges and deburr thoroughly to prevent debris ingress into pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper lubrication, leading to burrs and material deformation. | Employ high-speed steel or carbide cutting tools with adequate coolant lubrication for clean, precise cuts. |
| Not accounting for thermal expansion during fabrication or operation. | Design components with slight clearances to accommodate potential expansion and contraction due to temperature fluctuations. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic manifold construction, Custom valve bodies and actuators, Enclosures for pneumatic controls.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||