This Aluminum 6061 stock sheet is engineered for demanding pneumatic applications. Its robust alloy composition ensures durability and reliable performance in pressure systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.195" |
| Length | 18" |
| Width | 19" |
Built to exacting engineering tolerances, this 0.195" thick Aluminum 6061 sheet measures 18" in length and 19" in width. Aluminum 6061 is a precipitation-hardened alloy renowned for its excellent strength-to-weight ratio, superior corrosion resistance, and good weldability. These properties make it an ideal material for manufacturing robust and lightweight pneumatic components such as actuator bodies, manifold blocks, and valve housings, where precision and material integrity are paramount for system efficiency and safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Machine sheet to required pneumatic component geometry using appropriate tooling and coolant. 3. Perform post-machining inspection for dimensional accuracy and surface finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade aluminum alloys for pressure-bearing pneumatic components. | Always specify and use Aluminum 6061 or equivalent for pneumatic parts requiring strength and corrosion resistance. |
| Inadequate deburring of machined edges on pneumatic components. | Thoroughly deburr all machined edges to prevent particle contamination within pneumatic systems, which can lead to valve malfunction or seal damage. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic Manifold Blocks, Actuator Housings, Valve Bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||