This 0.149" thick Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Its versatility makes it a preferred choice for a wide array of demanding industrial and commercial applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.149" |
| Length | 26" |
| Width | 26" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet measures 0.149 inches in thickness, 26 inches in length, and 26 inches in width. As a precipitation-hardenable alloy, 6061 exhibits excellent mechanical properties, including good formability, weldability, and resistance to corrosion. Its typical composition includes magnesium and silicon, contributing to its desirable characteristics for applications such as aircraft components, marine structures, automotive parts, and general fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and free of debris. 2. Utilize appropriate cutting tools designed for aluminum, such as a band saw or abrasive cutoff saw, with proper lubrication. 3. Smooth cut edges using a deburring tool or file to remove sharp burrs.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to poor cut quality and increased heat generation. | Employ sharp, dedicated aluminum cutting blades and maintain them regularly. |
| Insufficient lubrication during cutting, causing tool binding and premature wear. | Apply a suitable cutting fluid or lubricant specifically designed for aluminum to manage heat and chip evacuation. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace components, Marine structures, Automotive frames and parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||