This high-quality Aluminum 6061 stock sheet is engineered for superior performance in pneumatic applications. Its robust material properties and precise dimensions ensure reliability and durability in demanding operational settings.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.137" |
| Length | 38" |
| Width | 33" |
Designed for demanding industrial environments, this Aluminum 6061 stock sheet offers a nominal thickness of 0.137 inches, a length of 38 inches, and a width of 33 inches. Aluminum alloy 6061 is renowned for its excellent strength-to-weight ratio, superior corrosion resistance, and good weldability, making it an ideal substrate for fabricating critical pneumatic components such as housings, manifolds, and structural supports. Its machinability allows for precise component creation, ensuring leak-free seals and efficient air flow management within pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project requirements. 2. Cut sheet to desired component size using appropriate cutting tools for aluminum. 3. Machine and assemble components according to pneumatic system design specifications, ensuring all interfaces are properly sealed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to material deformation or rough edges. | Employ sharp, high-speed cutting tools specifically designed for aluminum, such as carbide or HSS end mills and saws, with appropriate feed rates and coolant. |
| Inadequate surface preparation before assembly, compromising seal integrity. | Thoroughly clean all mating surfaces to remove any oil, debris, or machining lubricants. Use a degreaser and ensure a smooth, uniform surface finish where seals will be applied. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic Valve Manifolds, Cylinder Housings and Mounts, Air Preparation Unit Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||