This Aluminum 6061 stock sheet, measuring 0.135 inches thick, 40 inches long, and 25 inches wide, is engineered for applications within lubrication systems. Its superior machinability and corrosion resistance make it a reliable choice.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.135" |
| Length | 40" |
| Width | 25" |
Precision-manufactured to tight tolerances, this Aluminum 6061 sheet offers an exceptional strength-to-weight ratio, crucial for weight-sensitive lubrication system components. Its nominal composition includes approximately 0.8-1.2% magnesium and 0.4-0.8% silicon, contributing to its good corrosion resistance and weldability. The T6 temper designation signifies a heat-treated and artificially aged condition, providing enhanced mechanical properties, including a yield strength of approximately 35,000 psi and an ultimate tensile strength of around 38,000 psi. These characteristics ensure durability and performance in demanding industrial lubrication environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to remove any debris or contaminants. 2. Position the Aluminum 6061 sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners (e.g., bolts, rivets) that are compatible with aluminum and the lubrication system's load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that can cause galvanic corrosion with aluminum. | Employ stainless steel or anodized fasteners specifically designed for use with aluminum alloys. |
| Over-machining, leading to reduced material integrity or excessive heat generation. | Utilize appropriate cutting speeds and lubrication during machining to maintain material properties and prevent thermal damage. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Lubricant reservoirs and containment, Pump and valve components in lubrication circuits, Guide rails and wear surfaces in automated lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||