This Aluminum 6061 stock sheet is a versatile, medium-strength alloy widely used in fabricating. Its excellent corrosion resistance and weldability make it suitable for a broad range of industrial and hobbyist projects.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.123" |
| Length | 38" |
| Width | 20" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet exhibits a thickness of 0.123 inches, a length of 38 inches, and a width of 20 inches. The 6061 alloy is a precipitation-hardened aluminum alloy, balancing good strength with excellent corrosion resistance and good formability. Its alloy composition is typically 0.8-1.2% magnesium, 0.4-0.8% silicon, and controlled amounts of copper and chromium. This material is well-suited for TIG and MIG welding processes. Typical yield strength is approximately 35,000 psi. Surface finish is typically mill finish.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly to remove any contaminants. 2. Measure and cut the aluminum sheet to the desired dimensions using appropriate cutting tools. 3. Prepare edges for joining (e.g., welding, riveting) as per project specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools, leading to burrs or uneven edges. | Utilize carbide-tipped blades or abrasive cut-off wheels designed for aluminum to ensure clean cuts. |
| Inadequate surface preparation before welding or bonding. | Degrease and lightly abrade the surfaces to be joined to promote strong adhesion and prevent inclusions. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural components, Welded assemblies, Marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||