This robust Aluminum 6061 stock sheet, precision-cut to 0.113" x 29" x 26", offers exceptional strength-to-weight ratio for demanding material handling applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.113" |
| Length | 29" |
| Width | 26" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet (0.113" thickness, 29" length, 26" width) is a prime choice for its excellent corrosion resistance, weldability, and high strength. The 6061 alloy, a medium to high strength aluminum with good formability, exhibits a tensile strength typically around 45 ksi and a yield strength of 40 ksi. Its machinability is good, making it suitable for intricate fabrication in material handling systems, structural components, and custom fixtures where durability and lightweight performance are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity of the aluminum sheet. 2. Plan and mark cut lines or fabrication points accurately. 3. Fabricate according to design specifications using appropriate cutting, drilling, and joining techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools or techniques, leading to burrs or deformation. | Employ sharp, appropriate cutting blades (e.g., carbide-tipped) and maintain consistent feed rates for clean cuts. |
| Inadequate support during machining or handling, causing bending or warping. | Ensure the sheet is properly supported on a stable surface during all fabrication and handling processes. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom material handling carts, Conveyor system components, Industrial shelving and racking.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||