This 0.091" thick Aluminum 6061 stock sheet offers excellent strength-to-weight ratio and corrosion resistance. Precisely cut to 47" x 26", it's a versatile raw material for demanding fabrication projects.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.091" |
| Length | 47" |
| Width | 26" |
Built to exacting engineering tolerances, this Aluminum 6061 alloy stock sheet is manufactured to meet rigorous industry standards. With a nominal thickness of 0.091 inches, a precise length of 47 inches, and a width of 26 inches, it exhibits superior mechanical properties including good weldability, excellent corrosion resistance, and high strength, making it a preferred choice for structural components in aerospace, marine, and general fabrication where reliability and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and surface finish against project requirements. 2. Prepare cutting or machining equipment according to standard operating procedures for aluminum alloys. 3. Fabricate or integrate into the final assembly, ensuring proper fastening and joining techniques are employed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs or deformation. | Employ sharp, high-speed steel or carbide-tipped cutting tools specifically designed for aluminum, and utilize appropriate lubrication to minimize heat and friction. |
| Inadequate surface preparation for welding or bonding. | Thoroughly clean the aluminum surface with a degreaser and a stainless steel brush to remove oxidation and contaminants prior to welding or applying adhesives. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine hardware and hulls, General fabrication and prototyping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||