This Aluminum 6061 stock sheet offers superior strength-to-weight ratio and excellent corrosion resistance. Precisely manufactured for demanding industrial and fabrication applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.085" |
| Length | 24" |
| Width | 18" |
Engineered for reliability and performance, this Aluminum 6061 alloy stock sheet boasts a nominal thickness of 0.085 inches, a length of 24 inches, and a width of 18 inches. 6061 is a precipitation-hardened aluminum alloy, offering a balanced combination of strength, excellent weldability, and good corrosion resistance, particularly after heat treatment. Its machinability is also a significant advantage for complex designs. This material is widely specified for structural components, marine applications, and general fabrication where a robust yet lightweight solution is required.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free of debris before fabrication. 2. Utilize appropriate cutting and joining techniques for aluminum alloys. 3. Perform necessary surface treatments or coatings as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for aluminum, leading to poor edge quality. | Employ sharp, high-speed steel or carbide-tipped tools specifically designed for aluminum cutting to achieve clean, precise edges. |
| Inadequate preparation for welding, resulting in porosity or weak joints. | Thoroughly clean the welding area to remove oxides and contaminants, and use appropriate argon shielding gas for optimal weld integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine hardware and fittings, Automotive parts and frames, General fabrication and prototyping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||