This high-quality Aluminum 6061 stock sheet is engineered for the rigorous demands of pneumatic systems. Its optimal dimensions and superior material properties ensure reliable performance and longevity in critical components.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.079" |
| Length | 37" |
| Width | 34" |
Precision-manufactured to tight tolerances, this 0.079" thick, 37" long, and 34" wide Aluminum 6061 sheet provides exceptional structural integrity. The 6061 alloy is renowned for its excellent strength-to-weight ratio, good corrosion resistance, and superior weldability, making it ideal for fabricating enclosures, manifolds, and structural elements within pneumatic systems. Its inherent durability withstands the pressures and operational stresses typical in industrial and automated environments. This stock material is designed for ease of machining, allowing for complex part geometries with minimal effort.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Accurately measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools (e.g., shear, laser, waterjet) for precise material separation. 4. Deburr all cut edges to remove sharp protrusions and ensure safety.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inaccurate cutting leading to oversized or undersized components. | Always verify measurements with calibrated tools before cutting and consider material kerf for precise dimensions. |
| Failure to deburr edges, creating safety hazards and potential damage to seals. | Thoroughly deburr all cut edges using files, deburring tools, or tumblers. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic Manifold Blocks, Enclosures for Pneumatic Controls, Structural Support Components in Pneumatic Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||