This Aluminum 6061 stock sheet is engineered for demanding abrading and polishing tasks. Its uniform composition and precise dimensions ensure consistent results and exceptional surface finishes.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.058" |
| Length | 38" |
| Width | 45" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet offers a nominal thickness of 0.058 inches (1.47 mm), a length of 38 inches (965.2 mm), and a width of 45 inches (1143 mm). Composed of Aluminum alloy 6061, it exhibits excellent corrosion resistance, good strength-to-weight ratio, and superior machinability. This material's inherent properties make it an ideal substrate for various surface treatments and finishing processes, ensuring predictable and repeatable outcomes in demanding industrial and fabrication environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface to be abraded or polished is clean and free of contaminants. 2. Securely fasten the Aluminum 6061 sheet to your abrading or polishing apparatus. 3. Apply consistent pressure and controlled motion during the finishing process.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grit abrasive for the desired finish. | Consult abrasive manufacturer guidelines and perform test runs to determine the optimal grit for your specific application and desired surface roughness. |
| Applying uneven pressure during the abrading process. | Maintain consistent and even pressure across the entire surface of the Aluminum 6061 sheet to prevent uneven material removal and achieve a uniform finish. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Surface preparation for coatings and adhesives, Achieving specific surface textures for decorative finishes, Deburring and edge finishing of fabricated aluminum parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||