This Aluminum 6061 Schedule 80 seamless pipe is engineered for extreme operational demands. Its robust construction ensures superior performance and longevity in corrosive and high-pressure environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 5.1" |
| Outside Diameter | 1.692" |
| Wall Thickness | 0.311" |
Purpose-built for heavy-duty applications, this Aluminum 6061 seamless pipe adheres to Schedule 80 dimensions, boasting a 5.1-inch outside diameter and a 1.692-inch outside diameter, resulting in a substantial 0.311-inch wall thickness. Manufactured from high-strength Aluminum 6061, known for its excellent corrosion resistance, weldability, and favorable strength-to-weight ratio, this pipe is ideal for structural components, fluid conveyance systems in aerospace, marine, and demanding industrial settings where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe support and alignment to prevent undue stress. 2. Clean pipe ends thoroughly before joining. 3. Utilize appropriate welding or joining techniques for Aluminum 6061, ensuring full penetration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrect joint preparation leading to weak welds. | Thoroughly clean and bevel pipe ends according to welding procedure specifications. |
| Over-tightening fittings, causing deformation. | Hand-tighten fittings, then use appropriate torque specifications for final tightening. |
A: This Seamless Pipe, Schedule 80 is manufactured from Aluminum 6061.
A: Structural components in aerospace, Marine piping systems, High-pressure hydraulic lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||