This high-quality Aluminum 6061 seamless pipe, conforming to Schedule 40 standards, offers exceptional strength and corrosion resistance for demanding industrial applications. Engineered for precision and durability.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 5.0" |
| Outside Diameter | 2.012" |
| Wall Thickness | 0.274" |
Specified by design engineers worldwide, this 5.0" NPS (Nominal Pipe Size) seamless pipe is manufactured from Aluminum alloy 6061. It features a precise outside diameter of 2.012 inches and a robust wall thickness of 0.274 inches, meeting Schedule 40 specifications. Aluminum 6061 provides an excellent balance of strength, weldability, and corrosion resistance, making it ideal for applications requiring lightweight yet durable structural components, fluid transfer systems, and heat exchangers in aerospace, marine, and general manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe preparation, including deburring and cleaning of cut ends. 2. Utilize appropriate welding procedures and filler materials for Aluminum 6061 to achieve full joint penetration and strength. 3. Conduct thorough post-weld inspection to verify weld integrity and absence of defects.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for Aluminum 6061, leading to brittle welds. | Always use manufacturer-recommended filler metals (e.g., 4043 or 5356) specifically designed for Aluminum 6061. |
| Inadequate cleaning of the pipe surface before welding, resulting in porosity. | Thoroughly degrease and wire brush the weld joint area to remove oxides and contaminants immediately prior to welding. |
A: This Seamless Pipe, Schedule 40 is manufactured from Aluminum 6061.
A: Structural framing in marine environments, Fluid and gas transfer lines in aircraft, Heat exchanger tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||