Engineered from robust Aluminum 6061, this Schedule 40 seamless pipe offers exceptional strength-to-weight ratio and corrosion resistance for demanding fluid and structural applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 2.9" |
| Outside Diameter | 2.721" |
| Wall Thickness | 0.241" |
Trusted by engineers across multiple sectors, this seamless pipe boasts a precise 2.9" inside diameter, a 2.721" outside diameter, and a substantial 0.241" wall thickness, conforming to Schedule 40 standards. Fabricated from Aluminum 6061-T6, it exhibits excellent machinability, weldability, and superior resistance to corrosion, making it suitable for a wide array of industrial environments. Its inherent strength and light weight are critical for applications requiring structural integrity without excessive load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect pipe ends for damage and clean thoroughly. 2. Apply appropriate joining compound or sealant to male threads if applicable. 3. Engage pipe into fitting or flange with a steady, even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during threading, leading to galling or thread damage. | Apply steady, even pressure and ensure proper alignment before tightening. |
| Incorrectly specifying pipe size based solely on nominal size, ignoring actual OD/ID. | Always verify actual outside diameter (OD) and inside diameter (ID) against application requirements. |
A: This Seamless Pipe, Schedule 40 is manufactured from Aluminum 6061.
A: Structural framing in aerospace and automotive, Hydraulic and pneumatic fluid lines, Corrosion-resistant piping systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||