This Schedule 40 seamless pipe, crafted from robust Aluminum 6061, offers superior corrosion resistance and strength. Its precise dimensions ensure reliable performance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 2.3" |
| Outside Diameter | 1.890" |
| Wall Thickness | 0.289" |
Manufactured under strict quality controls, this 2.3" nominal pipe size seamless pipe features an actual outside diameter of 1.890" and a wall thickness of 0.289". Composed of Aluminum 6061 alloy, it provides an excellent balance of strength, weldability, and corrosion resistance. This material is known for its moderate to high tensile strength and is widely utilized in structural components, fluid conveyance systems, and applications requiring a lightweight yet durable solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate sealant or threading tape to male threads if applicable. 3. Carefully thread the pipe into the fitting, hand-tightening initially, then using a wrench for final securement, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings or sealants. | Always verify that fittings and sealants are rated for aluminum and the intended service conditions. |
| Over-tightening threaded connections. | Hand-tighten first, then use a wrench for a final quarter to half turn, or as recommended by the fitting manufacturer, to prevent damage. |
A: This Seamless Pipe, Schedule 40 is manufactured from Aluminum 6061.
A: Structural framing and supports, Fluid and gas conveyance systems, Marine components and frameworks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||