This Schedule 160 seamless pipe, crafted from Aluminum 6061, offers exceptional strength and corrosion resistance. Its robust wall thickness ensures integrity under high pressure and demanding environmental conditions.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 1.4" |
| Outside Diameter | 4.439" |
| Wall Thickness | 0.422" |
Engineered for reliability and performance, this Aluminum 6061 seamless pipe is manufactured to exacting tolerances. With a nominal pipe size of 1.4 inches, it features a precise outside diameter of 4.439 inches and a substantial wall thickness of 0.422 inches, conforming to Schedule 160 standards. The 6061 alloy provides a balanced combination of strength, weldability, and corrosion resistance, making it suitable for critical applications in aerospace, marine, and industrial sectors where structural integrity and fluid conveyance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe preparation, including deburring all cut edges. 2. Utilize appropriate joining methods (e.g., welding, mechanical fittings) compatible with Aluminum 6061. 3. Verify system pressure and temperature ratings against the pipe's capabilities before final commissioning.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible welding filler metals for Aluminum 6061. | Consult welding procedures and use filler metals specifically recommended for 6061-T6 or similar tempers to maintain joint integrity. |
| Over-stressing the pipe beyond its design pressure or temperature limits. | Always perform thorough system design calculations and adhere to the pipe's rated specifications to prevent failure. |
A: This Seamless Pipe, Schedule 160 is manufactured from Aluminum 6061.
A: High-pressure fluid transfer systems, Structural components in aerospace and marine environments, Corrosive fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||